View 1274086-1_7720536.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

67 rf coax connectors bnc connectors, 75 ohm catalog 1307191 revised 10-00 technical support center/amp fax service dimensions are in www.amp.com/communications/com specifications 1-800-522-6752 717-986-7777 millimeters over [inches] subject to change. catalog 1307191 plugs, crimp these connectors have been designed for optimum performance and have a true 75 ohm impedance the complete length of the connector. the crimp die tooling listed below is different from the equivalent 50 ohm connectors. plugs interchangeable dies for interchangeable rg/u termination center body dim. pro-crimper dies for hand contact dielectric style hand tool tool 69710-1 part no. cable type plating plating l 354940-1 or & 626 pneu. pro-crimper head 318161-1 adapter 679304-1 179, 179a, hex crimp gold nickel polyethelene commercial 29.46 58425-2 413589-8 179b, 187, 1.160 187a, 161, o crimp gold nickel polyethelene commercial 35.56 318451-2 221185-8 belden 9221 1.140 58559-1 414858-2 179 o crimp gold nickel polyethelene economy 27.69 1.090 414918-2 1,3 hex crimp gold nickel polyethelene commercial 29.46 58425-2 1-413589-0 at&t 735a 1.160 o crimp gold nickel polyethelene commercial 27.69 58174-1 58248-3 1-221185-8 1.090 at&t ks 19224 l2, hex crimp gold nickel polyethelene commercial 29.46 58425-2 413589-4 rd179 , double braid 1.160 hex crimp gold nickel polyethelene commercial 29.46 58425-2 413589-3 belden 8218 1.160 o crimp gold nickel polyethelene commercial 27.69 58174-1 58248-3 221185-3 1.090 140, 210, 62, 62a, hex crimp gold nickel polyethelene commercial 29.46 58425-1 413589-2 62b, 59, 59a, 59b, 1.160 belden 9291, o crimp gold nickel polyethelene commercial 27.69 58536-1 58248-2 221185-2 9209, 9269 1.090 58558-1 414858-1 59, 59a, 59b o crimp gold nickel polyethelene economy 27.69 1.090 414918-1 2,3 302, belden 89269, 88241, hi-temp 62a, hex crimp gold nickel polyethelene commercial 29.46 58425-1 413589-1 times pl-62, berk tek 1.160 btdc-59, btdc-62 belden 8212, 9104, 29.46 9112, 9167, 9240, 9259, hex crimp gold nickel polyethelene commercial 1.160 58425-1 413589-9 9266, times fm-59, (rg-59 type 27.69 with 20 awg c.c.) o crimp gold nickel polyethelene commercial 1.090 58536-1 58248-2 221185-9 hex crimp gold nickel polyethelene commercial 29.46 58425-1 413589-7 belden 9145, 1.160 at&t 734a o crimp gold nickel polyethelene commercial 27.69 58536-1 1-221185-0 1.090 belden 9248, o crimp gold nickel polyethelene commercial 25.65 58536-1 221185-1 9114 1.010 6, 6a o crimp gold nickel polyethelene commercial 37.85 58538-1 58248-1 221185-7 1.490 belden 8281, hex crimp gold nickel polyethelene commercial 29.46 58425-3 413589-5 9141, 9231, 1.160 western electric 724, o crimp gold nickel polyethelene commercial 28.45 58538-1 58248-1 221185-5 728, 3049 1.120 comm/scope o crimp gold nickel polyethelene commercial 28.96 58536-1 2-221185-9 s59 hec 1.140 comm/scope o crimp gold nickel polyethelene commercial 28.96 58536-1 3-221185-1 f59 hec-z 1.140 belden o crimp gold nickel polyethelene commercial 27.69 58538-1 3-221185-3 88281 1.090 1 kit includes connector subassembly and ferrule only, center contact part no. 1-414724-0 supplied separately on strip. 2 kit includes connector subassembly and ferrule only, center contact part no. 414724-4 supplied separately on strip. 3 terminate with amp-o-lectric terminating machine 220152-1 with applicator. l max. 14.53 [.572] dia. max. hex and o crimp
68 rf coax connectors bnc connectors, 75 ohm (continued) catalog 1307191 revised 10-00 technical support center/amp fax service dimensions are in www.amp.com/communications/com specifications 1-800-522-6752 717-986-7777 millimeters over [inches] subject to change. plugs for jis cables, crimp plating body nickel center contact gold bulkhead jacks for jis cables, crimp plating body nickel center contact gold dielectric polymethylpentene 14.53 [.572] dia. max. l max. interchangeable dies for pro-crimper termination dim. hand tool 354940-1 part no. jis cable type dielectric lor pro-crimper adapter 679304-1 5c-2v hex crimp polymethylpentene 29.46 58425-3 1-413589-2 1.160 3c-2v hex crimp polymethylpentene 29.46 58425-1 1-413589-1 1.160 3c-2w hex crimp polymethylpentene 29.46 58425-1 1-413589-4 1.160 2.5c-2v hex crimp polymethylpentene 29.46 58425-2 1-413589-6 1.160 2.5c-2w hex crimp polymethylpentene 29.46 58425-1 1-413589-5 1.160 1.5c-2v hex crimp polymethylpentene 29.46 58425-2 1-413589-3 1.160 interchangeable dies for pro-crimper termination dim. hand tool 354940-1 part no. jis cable type dielectric lor pro-crimper adapter 679304-1 2.5c-2v hex crimp 75 ? 36.83 58425-2 1-413590-3 1.450 2.5c-2w hex crimp 75 ? 36.83 58425-1 1-413590-2 1.450 1.5c-2v hex crimp 75 ? 136.83 58425-2 413590-4* 1.450 note: all parts are packaged in 25 pieces per bag unless otherwise noted. * *packaged in 100 pieces per bag. 20.32 [.800] max. l max.
69 rf coax connectors bnc connectors, 75 ohm (continued) catalog 1307191 revised 10-00 technical support center/amp fax service dimensions are in www.amp.com/communications/com specifications 1-800-522-6752 717-986-7777 millimeters over [inches] subject to change. 14.53 dia. [.572] max. l max. 27.18 [1.070] hex and o crimp max. interchangeable dies for interchangeable rg/u termination center body dim. pro-crimper dies for hand contact dielectric style hand tool tool 69710-1 part no. cable type plating plating l 354940-1 or & 626 pneu. pro-crimper head 318161-1 adapter 679304-1 179, 179a, 179b, 187, hex crimp gold nickel polymethyl- commercial 39.45 58425-2 - 413588-8 187a, 161 pentene 1.553 belden 9221 at&t 735a hex crimp gold nickel polymethyl- commercial 39.45 58425-2 1-413588-0 pentene 1.553 at&t ks 19224 l2, hex crimp gold nickel polymethyl- commercial 39.45 58425-2 413588-4 rd179 pentene 1.553 double braid belden 8218 hex crimp gold nickel polymethyl- commercial 39.45 58425-2 413588-3 pentene 1.553 140, 210, 62, hex crimp gold nickel polymethyl- commercial 1 39.45 58425-1 413588-2 62a, 62b, 59, pentene 1.553 59a, 59b, belden 9291, o crimp gold nickel polymethyl- commercial 39.88 58536-1 58248-2 - 221402-2 9209, 9269 pentene 1.570 302, belden 88241, 89269, hi-temp 62a, times hex crimp gold nickel polymethyl- commercial 1 39.45 58425-1 413588-1 pl-62, berk pentene 1.553 tek btdc-59, btdc-62 double hex crimp gold nickel polymethyl- commercial 1 39.45 58425-3 413588-6 braided 59 pentene 1.553 belden 8212, 9104, 9112, 9240, 9167, 9259, 9266, hex crimp gold nickel polymethyl- commercial 39.45 58425-1 413588-9 times fm-59, pentene 1.553 (rg-59 type with 20 awg c.c.) hex crimp gold nickel polymethyl- commercial 39.45 58425-1 413588-7 belden 9145, pentene 1.553 at&t 734a o crimp gold nickel polymethyl- commercial 39.88 58536-1 221402-4 pentene 1.570 belden 8281, polymethyl- 39.45 9141, 9231 hex crimp gold nickel pentene commercial 1.553 58425-3 413588-5 right angle plugs, crimp
70 rf coax connectors bnc connectors, 75 ohm (continued) catalog 1307191 revised 10-00 technical support center/amp fax service dimensions are in www.amp.com/communications/com specifications 1-800-522-6752 717-986-7777 millimeters over [inches] subject to change. interchangeable dies for interchangeable rg/u termination center body dim. pro-crimper dies for hand contact dielectric style hand tool tool 69710-1 part no. cable type plating plating l 354940-1 or & 626 pneu. pro-crimper head 318161-1 adapter 679304-1 179, 179a, hex crimp gold nickel polyethelene commercial 33.02 58425-2 413760-8 179b, 161, 1.300 187, 187a, o crimp gold nickel polyethelene commercial 30.48 318451-2 221199-5 belden 9221 1.200 at&t 735a o crimp gold nickel polyethelene commercial 30.48 58174-1 221199-6 1.200 at&t ks 19224 l2, hex crimp gold nickel polyethelene commercial 33.02 58425-2 413760-4 rd179 1.300 double braid belden 8218 hex crimp gold nickel polyethelene commercial 33.02 58425-2 413760-3 1.300 140, 210, 62, hex crimp gold nickel polyethelene commercial 33.02 58425-1 413760-2 62a, 62b, 59, 1.300 59a, 59b, belden 9291, o crimp gold nickel polyethelene commercial 30.48 58536-1 58248-2 221199-2 9209, 9269 1.200 302, belden 88241, 89269, hi-temp 62a, times hex crimp gold nickel polyethelene commercial 33.02 58425-1 413760-1 pl-62, berk 1.300 tek btdc-59, btdc-62 belden 8212, 9104, 9112, 9240, 9167, 9259, 9266, hex crimp gold nickel polyethelene commercial 33.02 58425-1 413760-9 times fm-59, 1.300 (rg-59 type with 20 awg c.c.) at&t 734a, hex crimp gold nickel polyethelene commercial 33.02 58425-1 413760-7 belden 9145 1.300 belden 9248, o crimp gold nickel polyethelene commercial 30.48 58536-1 221199-1 9114 1.200 belden 8281, 9141, 9231, 33.02 western hex crimp gold nickel polyethelene commercial 58425-3 413760-5 electric 724, 1.300 728, 3049 jacks, crimp l max. hex and o crimp 11.08 dia. [.436] max.
71 rf coax connectors bnc connectors, 75 ohm (continued) catalog 1307191 revised 10-00 technical support center/amp fax service dimensions are in www.amp.com/communications/com specifications 1-800-522-6752 717-986-7777 millimeters over [inches] subject to change. 20.32 [.800] max. 34.93 [1.375] hex and o crimp max. 12.83 [.505 ] +0.13 -0.20 +.005 -.000 dia. 5.54 [.218 ] +0.08 -0.00 +.003 -.000 maximum panel thickness 6.1 [.240] recommended panel cutout interchangeable dies for interchangeable rg/u termination center body dim. pro-crimper dies for hand contact dielectric style hand tool tool 69710-1 part no. cable type plating plating l 354940-1 or & 626 pneu. pro-crimper head 318161-1 adapter 679304-1 179, 179a, hex crimp gold nickel polyethelene commercial 36.83 58425-2 413590-8 179b, 161, 1.450 187, 187a, o crimp gold nickel polyethelene commercial 34.93 318451-2 221221-5 belden 9221 1.375 at&t ks 19224 l2, hex crimp gold nickel polyethelene commercial 36.83 58425-2 413590-4 rd179 1.450 double braid hex crimp gold nickel polyethelene commercial 36.83 58425-2 413590-3 belden 8218 1.450 o crimp gold nickel polyethelene commercial 34.93 58174-1 58248-3 221221-3 1.375 140, 210, 62, hex crimp gold nickel polyethelene commercial 36.83 58425-1 413590-2 62a, 62b, 59, 1.450 59a, 59b, belden 9291, o crimp gold nickel polyethelene commercial 34.93 58536-1 58248-2 221221-2 9209, 9269 1.375 302, belden 88241, 89269, hi-temp 62a, times hex crimp gold nickel polyethelene commercial 36.83 58425-1 413590-1 pl-62, berk 1.450 tek btdc-59, btdc-62 double shield hex crimp gold nickel polyethelene commercial 36.83 58425-3 413590-6 rg-59 1.450 belden 8212, 9104, 9112, hex crimp gold nickel polyethelene commercial 36.83 58425-1 413590-9 9240, 9167, 1.450 9259, 9266, times fm-59 (rg-59 type o crimp gold nickel polyethelene commercial 34.93 58536-1 58248-2 221221-7 with 20 awg 1.375 c.c.) at&t 734a, hex crimp gold nickel polyethelene commercial 36.83 58425-1 413590-7 belden 9145 1.450 belden 9114, o crimp gold nickel polyethelene commercial 34.93 58536-1 221221-1 9248 1.375 belden 8281, 9141, 9231, 36.83 western hex crimp gold nickel polyethelene commercial 58425-3 413590-5 electric 724, 1.450 728, 3049 bulkhead jacks, crimp
72 rf coax connectors bnc connectors, 75 ohm (continued) catalog 1307191 revised 10-00 technical support center/amp fax service dimensions are in www.amp.com/communications/com specifications 1-800-522-6752 717-986-7777 millimeters over [inches] subject to change. bulkhead solder jacks front mount plating body nickel center contact silver 27.43 [ 1.083] 13.09 dia. [.515] max. maximum panel thickness 3.18 [.125] recommended panel cutout 9.75/9.65 [.384./380] dia. 4.04/3.96 [.159/.156] part no. 221244-1 (with solder terminal) bulkhead solder jack rear mount lockwasher and jam nut see page 74. plating body nickel center contact gold dielectric polymethylpentene bulkhead jack pc board mount accepts .054 dia. max. wire part no. 415187-1 (without solder terminal) 3/8-32 thread part no. 414217-1 17.78 dia. [.700] max. 31.75 [ 1.250] 1/2-28 thread accepts . .050 dia. max. wire max. max. 12.83 [.505 ] +0.13 -0.00 +.005 -.000 dia. 5.54 [.218 ] +0.08 -0.00 +.003 -.000 maximum panel thickness 6.35 [.250] recommended panel cutout 13.09 [.515] dia. max. 27.43 [1.083] max. accepts .054 dia. max. wire 3/8-32 thread 20.8 [.820] 11.07 [.436] max. 3.30 [.130] 12.70 0.1 [.500 .004 ] 11.2 0.1 [.441 .004 ] part no. 1274086-1 note: if insulating bushing required use part no. 227223-1 or 221951-1 (for details, reference page 56). note: if insulating bushing required use part no. 227223-1 or 221951-1 (for details, reference page 56).
73 rf coax connectors bnc connectors, 75 ohm (continued) catalog 1307191 revised 10-00 technical support center/amp fax service dimensions are in www.amp.com/communications/com specifications 1-800-522-6752 717-986-7777 millimeters over [inches] subject to change. body center dimensions part no. contact without with material plating abcl mounting posts mounting posts valox, gold1 6.91 21.08 13.88 3.48 413194-1 white .272 .830 .519 .137 *valox, 6.91 21.21 13.88 3.48 * white gold1 .272 .835 .519 .137 415634-2 (economy) valox, gold1 6.91 21.08 13.88 3.48 413194-2 black .272 .830 .519 .137 gold1 6.91 21.21 13.88 3.48 415634-1 *valox, .272 .835 .519 .137 black gold1 8.59 21.21 15.88 3.48 415633-1 (economy) .338 .835 .625 .137 valox, gold2 8.59 21.21 15.88 3.48 414459-1 white .338 .835 .625 .137 metal gold1 8.25 20.83 15.88 2.16 222092-1 .325 .820 .625 .085 metal gold1 8.25 20.83 15.88 222093-1 .325 .820 .625 gold1 8.25 20.83 15.88 3.48 414409-1 * metal .325 .820 .625 .137 (economy) gold1 8.25 20.83 15.88 414410-1 .325 .820 .625 *metal with gold1 6.91 20.83 12.70 3.48 415417-1 compliant .272 .820 .500 .137 posts tin-lead 8.56 21.21 15.88 3.48 415419-1 (economy) .337 .835 .625 .137 metal silver 8.25 20.83 15.88 2.16 222092-2 .325 .820 .625 .085 metal gold1 8.25 20.83 15.88 3.48 222092-3 .325 .820 .625 .137 metal gold1 6.91 20.83 12.70 3.48 414907-1 .272 .820 .500 .137 metal gold1 6.91 20.83 12.70 1274072-1 .272 .820 .500 *metal gold1 6.91 20.83 12.70 3.48 1274084-1 (economy) .272 .820 .500 .137 *metal gold1 6.91 20.83 12.70 3.48 1274084-2** (economy) .272 .820 .500 .137 *high temp w/ compliant gold1 6.91 21.21 13.88 2.79 415655-1** posts .272 .835 .519 .110 (economy) * *stamped and formed contact, phosphor bronze contact material **ir reflow compatible plating: gold1 0.00076 [.000030] thick gold2 0.00127 [.000050] thick note: if an insulating bushing is required see part number 330620 and panel cutout on page 54. c l c l recommended pc board layouts right-angle jacks pc board/panel mount outer shell nickel dielectric polymethylpentene lockwasher and jam nut see page 74. a b 34.93 [1.375] c mtg. hgt. 1/2-28 threads 1/2-28 threads valox body a b 34.93 [1.375] metal body c mtg. hgt. l * screw for panel thickness of 2.38 [3/32] or greater * part no. 221108-2. * screw for panel thickness of less than 2.38 [ 3/32 ] * part no. 221108-4. without mounting posts with mounting posts (top view) 10.16 0.08 [.400 .003 ] 5.08 0.05 [.200 .002 ] 2.54 0.05 [.100 .002 ] gs 0.89 0.08 [.035 .003 ] 2.64 [.104] dia. clearance hole for 2-56 self-tapping screw* (2 holes) 5.08 0.05 [.200 .002 ] 2.01 0.08 [.079 .003 ] (2 holes) mating face (top view) 10.16 0.08 [.400 .003 ] 5.08 0.05 [.200 .002 ] 2.54 0.05 [.100 .002 ] gs 0.89 0.08 [.035 .003 ] 5.08 0.05 [.200 .002 ] mating face 12.83 [.505 ] +0.13 -0.00 +.005 -.000 dia. 5.54 [.218 ] +0.13 -0.00 +.005 -.000 maximum panel thickness 6.1 [.240] recommended panel cutout
74 rf coax connectors bnc connectors, 75 ohm (continued) catalog 1307191 revised 10-00 technical support center/amp fax service dimensions are in www.amp.com/communications/com specifications 1-800-522-6752 717-986-7777 millimeters over [inches] subject to change. vertical jacks pc board/panel mount plating outer shell nickel dielectric polymethylpentene valox body metal body recommended pc board layouts l b 34.93 [1.375] mtg. hgt. 15.88 [.625] 1/2-28 thread l b 34.93 [1.375] mtg. hgt. 15.88 [.625] 1/2-28 thread center part no. body contact dim. dim. without with material plating bl mounting mounting posts posts valox, gold1 21.2 13.48 414933-1 413528-1 black .835 .137 valox, gold2 21.21 3.48 413528-3 black .835 .137 *valox, black gold 21.21 3.48 415632-1 (economy) .835 .137 *valox, white gold1 21.21 3.48 415632-2 (economy) .835 .137 metal gold1 20.83 3.48 414983-1 222132-1 .820 .137 *metal tin-lead 21.21 3.48 415520-1 (economy) .835 .137 *stamped and formed contact, phosphor bronze contact material plating: gold1 0.00076 [.000030] thick gold2 0.00127 [.000050] thick note: if an insulating bushing is required see part number 330620 and panel cutout on page 54. lockwasher and jam nut part no. 1-329632-2 part no. 1-329631-2 12.83 [.505 ] +0.13 -0.00 +.005 -.000 dia. 5.54 [.218 ] +0.13 -0.00 +.005 -.000 10.16 0.08 [.400 .003 ] 5.08 0.05 [.200 .002 ] 5.08 0.05 [.200 .002 ] 2.64 [.104] dia. clearance hole for 2-56 self-tapping screw* (2 holes) 2.54 0.05 [.100 .002 ] 0.89 0.08 [.035 .003 ] gs 5.08 0.05 [.200 .002 ] 5.08 0.05 [.200 .002 ] 2.54 0.05 [.100 .002 ] 0.89 0.08 [.035 .003 ] 2.01 0.08 [.079 .003 ] (2 holes) gs (top view) (top view) without mounting posts with mounting posts 10.16 0.08 [.400 .003 ] 10.16 0.08 [.400 .003 ] 10.16 0.08 [.400 .003 ] maximum panel thickness 6.1 [.240] recommended panel cutout * screw for panel thickness of 2.38 [3/32] or greater * part no. 221108-2. * screw for panel thickness of less than 2.38 [ 3/32 ] * part no. 221108-4.
75 rf coax connectors bnc connectors, 75 ohm (continued) catalog 1307191 revised 10-00 technical support center/amp fax service dimensions are in www.amp.com/communications/com specifications 1-800-522-6752 717-986-7777 millimeters over [inches] subject to change. vertical metalized jacks pc board mount plating dielectric ?teflon a max. 11.49 [.470] dia. max. recommended pc board layout style a style b style c body center leg contact style length part no. plating plating l nickel gold b 3.30 1274291-2 .130 tin-lead gold b 3.30 1274291-1 .130 tin-lead gold b 6.35 1274359-1 .250 tin-lead gold c 4.44 414394-1 .175 nickel silver a 6.35 413986-1 .250 6.88 0.05 [.271 .002 ] 6.88 0.1 [.271 +.003 ] .004 1.5 0.1 [.059 +.004 ] .003 3.43 0.05 [.135 .002 ] recommended pc board layout 17.45 [.687] 15.88 [.625] l l press fit vertical metalized jacks pc board mount dim. part a no. 20.57 222462-1 .810 16.26 414088-1 .640 20.57 [.810] l drill holes for 0.94 0.05 [.037 .002 ] dia. pin (5 places) 6.35 0.05 [.250 .002 ] 12.7 0.08 [.500 .003 ] 6.35 0.05 [.250 .002 ] 12.7 0.08 [.500 .003 ] 6.88 0.05 [.271 .003 ] 6.88 0.08 [.271 .003 ] 3.43 0.05 [.135 .002 ] 3.44 0.08 [.135 .003 ] 3.43 0.08 [.135 .003 ] 6.88 0.05 [.271 .003 ] 6.88 0.08 [.271 .003 ] 2.44 0.08 [.096 .003 ] (4 holes) dia. 1.32 0.08 [.052 .003 ] dia. (4 plated-thru holes) dia. 1.02 0.08 [.040 .003 ] (plated-thru hole) dia. insulating bushing material nylon part no. 222163-1 only to be used on p/n 222462-1 and 222006-1 16.64 [.655] sq. 1.50 0.08 [.059 .003 ] (4 holes) dia. 1.02 0.08 [.040 .003 ] dia. 2.96 [.115] max. 6.61 [.260] max. 14.61 [.575] dia. 11.94 [.470] dia.
recommended pc board layout 6.6 0.08 [.260 .003 ] 6.6 0.08 [.260 .003 ] 3.3 0.08 [.130 .003 ] 1.17 0.08 [.046 .003 ] 2.11 0.08 [.083 .003 ] dia. (4 holes) maximum pc board thickness 2.54 [.100] dia. 76 rf coax connectors bnc connectors, 75 ohm (continued) catalog 1307191 revised 10-00 technical support center/amp fax service dimensions are in www.amp.com/communications/com specifications 1-800-522-6752 717-986-7777 millimeters over [inches] subject to change. press fit, bulkhead vertical metalized jack includes hardware 28.78 [1.133] 4.37 0.51 [.172 .020 ] 5 plcs. 24.41 [.961] 10.80 [.425] + 0.08 0.00 + .003 ] .000 5.54 [.218 + 0.13 0.00 + .005 ] .000 12.83 [ .505 part no. 1274124-2 recommended pc board layout c l 6.15 [.242] 10.97 [.432] mounting height 28.4 [1.118] max. 17.48 [.688] sq. 15.88 [.625] max. 1.7 0.05 [.067 .002 ] (2 places) for drive screw 6.35 0.05 [.250 .002 ] 6.35 0.05 [.250 .002 ] 12.7 0.05 [.500 .002 ] 12.7 0.05 [.500 .002 ] 1.02 0.08 [.040 .003 ] (plated-thru hole 3 places) press fit vertical metalized jacks pc board mount (continued) pc board thickness (min.) part no. 2.36 221336-3 .093 3.17 221336-4 .125 recommended pc board layout body contact center part plating dielectric plating contact length no. dimension nickel tpx gold2 .171 [.007] 4.34 [.171] 413558-1 tin-lead teflon gold2 .171 [.007] 4.34 [.171] 413558-2 nickel tpx gold2 .131 [.005] 4.34 [.171] 413558-3 tin-lead tpx gold1 .171 [.007] 4.34 [.171] 413558-4 nickel tpx gold1 .171 [.007] 4.34 [.171] 413558-5 gold1 0.00076 [.000030] thick gold2 0.00127 [.000050] thick dia. right angle metalized jacks pc board mount 3.81 0.08 [.150 .003 ] 1.19 0.18 [.047 .007 ] 1.78 0.08 [.070 .003 ] 7.62 0.08 [.300 .003 ] 7.62 0.08 [.300 .003 ] dia. dia. part no. 1274127-1 25.40 0.38 [1.000 .015 ] 11.43 0.43 [.450 .017 ] 21.84 [.860] 17.78 [.700] 11.07 [.436] max. 1.02 0.08 [.040 .003 ] 3.43 [.135] 6.88 [.271] 3.43 [.135] 6.88 [.271] holes plated through 5 plcs.
77 rf coax connectors bnc connectors, 75 ohm (continued) catalog 1307191 revised 10-00 technical support center/amp fax service dimensions are in www.amp.com/communications/com specifications 1-800-522-6752 717-986-7777 millimeters over [inches] subject to change. right angle metalized jacks pc board/panel mount press fit right angle metalized jack pc board mount part no. 1274028-1 maximum panel thickness 6.35 [.250] recommended panel cutout 12.83 +0.13 -0.00 [.505 +.005 ] -.000 dia. 5.64 +0.08 -0.00 [.222 +.003 ] -.000 12.83 +0.13 -0.00 [.505 +.005 ] -.000 dia. 5.54 +0.08 -0.00 [.218 +.003 ] -.000 dia. part no. 222117-1 36.07 [1.420] 11/16 right angle adapter (jack-plug) plating body nickel center contact gold dielectric polymethylpentene 22.89 [.901] max. 14.53 [.572] 26.97 [1.062] part no. 415020-1 maximum panel thickness 6.35 [.250] recommended panel cutout dia. max. bulkhead jack-jack adapter plating body nickel center contact gold dielectric polymethylpentene body dim. plating dielectric a part no. tin-lead tpx 16.26 415373-1 .640 tin-lead tpx 11.66 1274425-2 .459 19.53 0.25 [.769 .010 ] 4.57 0.25 [.180 .010 ] 8.59 0.25 [.338 .010 ] 4.65 0.51 [.183 .020 ] 2 plcs. 4.94 0.76 [.195 .030 ] 2 plcs. 4.44 1.14 [.175 .045 ] 14.48 [.570] 28.27 0.25 [1.113 .010 ] max. 12.70 [.500] 1.02 0.08 [.040 .003 ] 3 plcs. plated thru hole 1.70 [.067] 2 plcs. plated thru hole for drive screw 12.70 [.500] 6.35 [.250] 6.35 [.250] dia. dia. recommended pcb configuration 1/2-28 thread a 27.64 0.51 [1.088 .020 ] 10.97 0.18 [.432 .007 ] 6.15 0.25 [.212 .010 ] 4.34 [.171] .603 [15.32 ] .003 0.08 .242 [6.15 ] .010 0.25 a .183 [4.65] 1/2-28 thread 1.088 [27.64 ] .020 0.51 4.34 [.171]
technical support center/amp fax service dimensions are in www.amp.com/communications/com specifications 1-800-522-6752 717-986-7777 millimeters over [inches] subject to change. 78 rf coax connectors bnc connectors, 75 ohm (continued) catalog 1307191 revised 10-00 8.89 0.13 [.350 .005 ] + 0.13 0.00 + .005 .000 9.65 [.380 ] recommended panel cutout bulkhead jack-push on plug adapter 41.92 [1.650] 14.35 [.565] max. 8.43 [.332] max. part no. 1274007-1

▲Up To Search▲

Price & Availability of 1274086-1

	To Download 1274086-1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .